Tile, flooring and paver calculators that show their math
Work out exactly what to buy: tiles and boxes, grout and thinset, planks and underlayment, pavers, gravel base and sand. Every result shows the formula and the assumptions, and every calculation is unit-tested.
Example
A 12 × 10 ft floor in 12" × 24" tile with 1/8" joints and 10% waste:
65 tiles
120 sq ft ÷ (24⅛" × 12⅛" ÷ 144) × 1.10 = 65
Ignoring the joint would give 66: on small tile with wide joints the gap is much larger.
Tile
Floors, walls, showers and backsplashes, with the materials that go under and between the tiles.
-
Tile Calculator
Tiles and boxes for floors and walls, with waste by pattern, cuts, grout, thinset and backer board.
-
Tile Installation Cost Calculator
Materials and labor for floors, walls, showers and backsplashes, with your own labor rate.
-
Shower Tile Calculator
Shower walls, floor, niche and curb or a tub surround, with waterproofing area.
-
Backsplash Tile Calculator
Counter runs × height, minus windows and the range: subway tile or mosaic sheets and trim.
-
Grout Calculator
Pounds and bags of grout from tile size, joint width and thickness.
-
Thinset Calculator
Bags of thinset by trowel notch, back-buttering and cement board bed.
Flooring
Laminate, vinyl plank, hardwood and carpet by the box or off the roll.
-
Flooring Calculator
Boxes of laminate, LVP or hardwood, carpet off the roll, underlayment, transitions and trim.
Pavers & hardscape
Patios, walkways and driveways: pavers, gravel base, sand, edging and cost.
-
Paver Calculator
Pavers by size and pattern, gravel base, bedding sand, polymeric sand, edging and cost.
-
Paver Sand Calculator
Bedding sand in cu yd, tons and bags, and polymeric sand from the real joint volume.
-
Paver Base Calculator
Gravel base depth by use and soil, compaction, cu yd, tons and bags.
-
Paver Installation Cost Calculator
Patio, walkway or driveway: materials from real quantities plus labor and excavation.
-
Paver Patio Slope Calculator
Total drop, percent slope and string-line heights for drainage.
Measuring & units
Room area for any shape, drop ceilings, and unit conversions.
-
Square Footage Calculator
Sq ft, sq yd and m² for any room shape, plus perimeter for trim.
-
Ceiling Tile Calculator
2×2 or 2×4 panels, main tees, cross tees, wall angle and hanger wire.
-
Flooring Unit Converter
sq ft ↔ m² ↔ sq yd, in ↔ mm, cu yd ↔ m³, and cu yd ↔ tons by material.
Guides
-
How Much Extra Tile Should You Buy?
Waste percent by pattern, tile size and room shape, and why.
-
Tile Sizes Chart
Nominal and actual sizes, tiles per sq ft, joints and box coverage.
-
How to Measure a Room for Flooring or Tile
Rectangles, L-shapes, closets and angled walls, with a worked example.
-
How Deep Should a Paver Base Be?
Base depth by use, soil and frost, plus excavation depth.
Why these numbers are more accurate
- The grout joint is part of the math. A tile covers its size plus the joint, so small tiles with wide joints need noticeably fewer pieces than area ÷ tile size suggests.
- Waste follows the layout. Straight, offset, diagonal and herringbone each get their own allowance, with the reason shown, and small rooms get more.
- Real shapes. Several rooms, L-shapes, triangles, circles and cutouts for tubs, cabinets and islands.
- Materials from geometry. Grout and polymeric sand come from the actual joint volume; the gravel base grows past the edges and allows for compaction.
- Always rounded up, never twice. Boxes, bags and sheets round up to whole units, and floating-point noise never adds a box.
- Tested. Every formula and conversion has automated tests. See how we check our math.
Inputs accept feet and inches the way you measure them (12' 6", 150"), and every calculator has a metric switch. Nothing you type leaves your browser.